Enter the pipe outside diameter, turbine zone, fluid type and vibration level — the tool returns the recommended DIN 3015 series, insert material and hardness, body material, fastener grade and indicative torque range.
Inputs
Recommended Specification
Fill in the inputs and press Get Specification to see the recommended clamp configuration.
Engineering note: This tool provides indicative reference output based on DIN 3015-1/2 and general wind turbine application practice. Recommended values are a starting point — always verify against OEM specifications, applicable project standards, and manufacturer data sheets before finalising a procurement specification. Values for torque are indicative for standard galvanised steel body with EPDM or NBR Shore A 60–70 insert and grade 8.8 bolt; adjust per § 06 of WEC-KB-098.
